Mastercam刀路加工時間，加工長度信息補丁

若楓 · 發表于 2016-10-27 19:28:18

馬上注冊，結交更多好友，享用更多功能，讓你輕松玩轉社區

您需要登錄才可以下載或查看，沒有賬號？立即注冊

×

Mastercam刀路加工時間，加工長度信息補丁。
本補丁可以輸出刀路加工時間，加工長度等。
時間包含換刀時間，如果需要更準確的時間，請自行調整換刀時間即可。
使用方法及需要添加的代碼如下，可參考圖片的說明：

# --------------------------------------------------------------------------
# Optional Run Time Output Settings
# --------------------------------------------------------------------------
tlchgtime       : 0.066 #Tool Change Time (* in Minutes *)
use_time_info    : 0    #Output program time and path length information
use_tch_pos    : 1    #Calculate with Home positions tool change postion 0=No, 1=Yes
time_format    : 2    #Time format of output times in NC code: #1 = 2hrs, 14mins, 25.08sec, #2 = 2h 14:25

psof$          #Start of file for non-zero tool number
   psetup

ptlchg$       #Tool change
   pinitial_path

peof$          #End of file for non-zero tool
   if use_time_info, ptimes_out #Total ending data for tool (Path Length and Times)

pncoutput    #Movement output
   ptime_calc

pdrlcommonb    #Canned Drill Cycle common call, before
   ptime_calc

pcanceldc$    #Cancel canned drill cycle
   ptime_calc

[STARTBIN]

如果需要添加每把刀的加工時間，請?zhí)砑右幌麓a：
在pretract 下面調用單個刀具時間

pretract       #End of tool path, toolchange
      ptool_time

ptool_time #Calc. current Tool Time
      ttltime = tltime + trtime          #Calc. current Tool Time
      "(Current Time = ", ptimeout, ")", e$

登錄/注冊后可看大圖